My LED lights with batteries - first conversions

At teh Chicago show I was asked if I could make my LED lights work off batteries. Naturally I said yes and then had to come home and figure out how I was actually going to do it. My first effort turned out quite well I think. I was asked to convert one of my sconces, so the first thing I did was figure out what size battery I could hide behind it. A CR2032 3 volt button battery fit the space available. I then added some thickness to the sconce sides to largely conceal the battery and on/off switch. I added some magnets - very small magnets to the back and supplied a piece of self adhesive metal strip to go on the wall - and presto chango (and 3 hours of work) later. a battery powered sconce. My battery life test indicates that one can expect at least 3 - 4 days constant running (72 -96 hours) for the battery which I think is pretty good. The photo on the other hand is bad, but will have to do for now.

some new lights as well

Getting some more new items ready  - this time a Deco style light fixture, which has a background made using French banding from the 1930's - we won't see anything like it again.

same light - one off one on, about 2.5" 6cm in diameter

about 2.75" or 7 cm in diameter

The second light can be a vanity or dressing table light - it would also work as a chandelier I suspect. The centre is a glass mirror. It's a tad hard to see, but the backing is a black hexagon shape. Both fixtures use LEDs

another show so more modern furnishings

 No rest for the wicked, so I'm back in the studio preparing new items for my next sow - the KDF (Kensington Dollhouse Festival. I've made some pieces that are variations on previous work, and, of course, some completely new designs. One of the latter is this dressing table, with a beautiful piece of Olice wood for the top. The drawer is Holly with an inlay strip

Dressing table - Olive, Holly and Jatoba woods - about 4 inches or 10 cm long

Panels rotate and can be interchanged - about 6 " 15 cm tall

For this screen, I left the top uncapped, so the various coloured panels and be moved from post to post to create new designs. Each panel is about 1.16 " or 3 cm wide

inlaid shelving unit - glass is 3" - 7.5 cm long

by hook or crook it lights the spot

Shepherd’s crook light

A new light, this one can serve as a reading light or as an accent light as well. The base is a block of machined 1/4 inch thick aluminum set in a Pear wood rectangle. The light source(s) is a group of LEDs. I just grabbed the first chair that came to hand; it probably would look better with one of my modern chairs.

new sculpture/light

Living as I do in a major earthquake zone, it’s a little hard to get too excited today about miniatures while thinking about the tragedies in Japan. Who knows when it will be our turn.
None the less, I still have to make a living, so here’s a variation on a theme. My client asked me to make all the columns on this sculpture under-lit, and as the customer is always (well, usually) right, I modified the piece. Of course that also meant I needed to create a new base to accommodate the additional electronics.The piece is about 2.5 inches (6 cm) tall.

My closing though today is from John Donne
- MEDITATION XVII  circa 1624 from Devotions upon Emergent Occasions
No man is an island entire of itself; every man is a piece of the continent, a part of the main;

if a clod be washed away by the sea, Europe is the less, as well as if a promontory were, as well as any manner of thy friends or of thine own were; any man's death diminishes me, because I am involved in mankind. And therefore never send to know for whom the bell tolls; it tolls for thee.

new month - new light design

sort of shows how it lights the work area

close-up to show details

Working hard to avoid finishing other projects I spent a little time to design and make this desk lamp. In my entirely unbiased opinion it’s kind of cool. The base is aluminum, LED light source - about an inch (.25cm) tall - I haven’t measured it yet.

Is “quoting“ my photos a complement?

I had a cheap laugh today. I was doing some research on furniture by Paul Frankl, on the internet, and what did Google turn up? Sites like antique stores and auction houses using my photos(unattributed of course) of MY furniture, based on Paul Frankl originals, but not the same, as photos of actual Frankl furniture. I guess that’s flattering!?

another light “thing”

About 5 inches (12 cm tall)

the bench is 5 inches or 12 cm long

Well, I have continued my exploring with light piping. This time I wanted to se the effect of twisting a square  length of acrylic would do to light patterns. It does work in interesting ways, although again capturing it for the web is tricky. I’ve also added a photo of it beside a bench that is headed to the Kruger collection at the University of Nebraska - Lincoln. I must say I feel pretty good about that!

new lights - sculptures

Well, no one else makes them like this.

I decided it was time to get creative again (easier to do when there is no order back-log) and I started designing new lights that really are sculptures. The first one, which is about 3 inches (7.5 cm) tall, is the subject of the photos. The drawback to the lights is that they are extremely hard to photograph and successfully convey how they look “live“. The bottom of the base is illuminated.

here it is beside one of my Morris chairs - for scale - with additional light

rotated 180 degrees

turned 90 degrees (more or less)

other end, from a higher angle.

out from under the backlog

I've more or less finally got completely up-to-date on my orders, so now I get to create new things again. One new light that was part of the order backlog was a plant stand with an illuminated top. After a couple of false starts I decided on a simple rectangular column of aluminium and painted wood with a translucent top. I think it came out quite respectably. It's about 3 inches  (7.6cm) tall and the light source is an LED.