in De Stijl - so to speak

I know puns are the lowest form of humour but I can't miss a chance like this. 

Stephanie commented she thought there was some feel of Mondrian in the golden section display cases. He and Gerrit Rietveld belonged to the Dutch design group De Stijl (The Style). I understand that it was Mondrian who suggested the Red/Blue colour scheme to Reitveld - the original chair was plain wood. In any event here's my photo of the pieces together.

Red/Blue chairs and display unit

A Couple of Golden Section Display units

I mentioned previously I had a couple of other display units based to some extent on the golden section. These particular units are about 6" (15cm tall) but scale down quite nicely; the golden section is a ratio of side lengths, not a fixed number.

Golden sections and rectangles

I've recently completed a couple of books on the use of the golden section in design - yes I know I have to get a life - and made a couple of pieces trying to use the value as much as possible. This display unit is one result. It works both as a vertical and horizontal piece. 

About 6 " 15 cm tall

Here's a shot with one of Neil Carter's nice deco pieces on display. I have a couple of other units that I will take photos of and add here. There are some other examples shown in my modern furniture pages. I've also made some "clip on" led lights, so the individual compartments can be lit up. Putting a back on the piece is a good idea as it hides the wires - also means it's easy to make battery powered.

Same unit, horizontal orientation

New small table - and trying to show the figured wood top

I was rummaging through my "nice pieces of wood to use some day" and came across a chunk of figured maple that the late great Ken Manning (of mini instruments fame) gave. I decided that it would work well in a small table so I put together what I think is a quite elegant little piece. The trick is showing people the amazing figure in the maple top. I finally decided that short of a video, the best way would be to take several pictures from the same vantage point, and rotate the table so the top does its magic. It still isn't as good as actually seeing the changes as you move your head, but is a step in the right direction. The table is about 3 " (7.5 cm) long and the maple is trimmed with ebony.

The jig(s) is up.

Ouch - terrible pun. In any event, moving right along, I recent had an order for one the classic Reitveld Red-Blue chairs, which is one of my all time favourite designs, although I wouldn't actually sit in one unless forced to. It is VERY low, and obviously not well padded. 

It also is a "challenge" to make.  Each of the "sticks is less than 3/32 " square (2.5 mm) which is a very small gluing surface. In addition, everything has to be perfectly square. I do 2 things to help me keep my sanity making the chair; I use lots of jigs and Scotch - no, no, brass pins, to hold the joints.

In no particular order, here are some snaps of the various jigs being used in the construction process.

a new cabinet base for a shelf unit

As part of a recent commission I've been playing with a new look for a low base to support a shelving unit. The idea was to raise the shelf unit up high enough off the floor so the contents of the lower sections could be seen. I think this may do the trick. It's made of rosewood and ebony and stands about 1.75 inches (4.4 cm) tall and 5 inches (12.4 cm long). The length was dictated by the niche where the unit is to go in the client's room box. The doors are real glass and do slide. Getting them in place was a "joy" shall we say?   I'll put up the complete piece - base and shelf when I've got a suitable photo.

square tiles on floor are 1/2 inch square

getting the drop on a space problem

First - please excuse the bad pun.

One of my clients had a problem; she had a small room box but wanted quite a variety of furniture in it, including a dining table and some chairs. I suggested a couple of stackable chairs and a drop leaf table. The table is quite small when closed and against a wall - just about 20 scale inches (50 cm) deep and 24 (60 cm)wide, but opened fully it is 68 inches (173 cm) long.

The brass circles are the ends of rods I used to peg the cross piece joint. I thought they and a nice contrast to the rich wood colour.

I only have one swing out support - hey it's my design and this keeps it lighter looking.

More new furniture

I've been focusing on furniture lately, partly because I can only have so many room boxes on hand (sort of LOL). I came across another interesting Paul Frankl design that I modified slightly  - a low bookcase. This piece clearly shows the influence oriental designs had on Mr Frankl. I took this photo of it beside the coffee table I recently made as well. The bookcase is about 29 scale inches high.

Based on  Paul Frankl originals

thing-of-purpose table

I recently came across a napkin ring that just begged me to get it and do something with it; so I did. The result is a table about 17 scale inches tall, with a acrylic top. I'll have something on it when I take photos for the web site, but I sort of like the "art photo/sculpture" aspect of this shot.

More Frankl Art Deco furniture

While doing some research for a commission, I came across a goldmine of images of Art Deco period furniture by the American Designer Paul Frankl at an old auction listing

I am in the process of "miniaturizing" a number of the pieces: here, for example, is a progress shot of my take on an oriental coffee table. Among the changes - different colours, discarded the black glass top as superfluous in this colour scheme, and removed the metal rod supports as well.

I couldn't resist the raspberry from my garden as an indication of scale. The table is 14.5 scale inches tall and 28 inches long. I'm probably going to do the occasional table as one of my next projects.

Well, I have been doing things although you wouldn't know it from the blog. One item was a request from a long time customer for a light based on a Kharbarosk Lamp. After many false starts - making the complete rings out of wood was one issue - I came up with this:

Uses an LED for the light source

It's about 1.5 inches - 3.75 cm tall and the rings are about 7/8th inches - 2.2 cm in diameter.

 I also spent some time making a pair of Frankl dressers - in Birds' Eye maple that also proved challenging but overall I think they came out well. These are another item that proves hard to photograph well. The wood patterns actually are much more attractive when seen "live". I'm working on a version in plain woods that should photograph better. These were BIG dressers - 77 inches 195 cm. tall.